This could occur if the queue were manually deleted or an error occurred with the IPC sub-system (e.g., the message queues were full). ACTION Resubmit tmshutdown with the -l option to specify the servers to be shut down on the specified processor for migration. Normally this error implies that the TUXCONFIG environment variable is not set correctly, or that the application is not booted. SEE ALSO tmshutdown (1) 765 ERROR: must run on master node DESCRIPTION tmboot must be run on either of the master nodes specified in the MASTER parameter of the *RESOURCES section. http://tawish.org/tuxedo-cannot/tuxedo-cannot-attach-to-or-create-shared-memory.php
Cleaning the bulletin board on machine SITE1. An interesting fault location for the execution of the program (SYS_OP_C2) U010176014: Good intentions of the way to learn it What is the impact of the new table alter field operations? Check the activated servers and re-try the operation with valid selection criteria. ACTION Either modify the value of this parameter in the configuration file and rerun tmloadcf(1), or upgrade the site in question to a later release of the TUXEDO System. https://docs.oracle.com/cd/E13203_01/tuxedo/tux64/errman/ctmsg16.htm
This request isn't valid since the -R option must be used with either option -l or -g . The header files can be found in the include directorylocated in $TUXDIR (the root directory of TUXEDO). Buy Suitcases from the Home department at Debenhams. ACTION The most likely cause of this problem is a non-TUXEDO System process incorrectly connecting to the TUXEDO System listener (tlisten(1)) process and attempting to interact with the tagent.
If the TLI network provider is being used, the network open will fail.
CSDN 2015 blog star selection results announced Tuxedo many people use the tmadmin command, how to force the stop service Label TuxedoTmadminTmshutdown 00:39 2015-07-05 1013 people read comments(0) Collection Report Classification:
TMS servers are shut down based on the TMSNAME and TMSCOUNT parameters for the group entry.
Grad Tuxedos Winnipeg GRAD Grad.
SEE ALSO ubbconfig (5) 1605 ERROR: SERVICES entry entry_name - must have the same BUFTYPE for all SERVICE entries.
ACTION Re-try the operation. ACTION Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct. 795 ERROR: I have heard of cases where BBLQUERY is set as high as 1800 seconds (half hour). Libtux_cat:250: Error: Tpsvrinit() Failed Because the SIGKILL signal cannot be trapped, any process that receives it is terminated immediately, regardless of the code being executed by the process at that time.
cannot shutdown, causes partitioning. Cmdtux_cat:764 This usually indicates that system resources did not exist to allow for the execution (e.g., a shortage of process table entries or swap space). If this fails with the same error, contact your TUXEDO System Technical Support. https://docs.oracle.com/cd/E13203_01/tuxedo/tux71/html/adboot9.htm ACTION Contact your TUXEDO System Technical Support. 1677 ERROR: Master migration attempted in non-LAN application DESCRIPTION A master migration to the backup was requested but the configuration does not have the
Relative paths and environment variables are not valid. MASTER Specifies themachine on which the mastercopy of the TUXCONFIGis found. The BEA Tuxedo IPC tool (that is, the tmipcrm(1) command) enables you to remove IPC resources allocated by the BEA Tuxedo system (that is, for core BEA Tuxedo and Workstation components On a multiprocessor (for example, 3B4000), all PEs are shut down, even if only one PE is specified. -P lmid With this option, tmshutdown attaches to the bulletin board on the
This could be because the servers could not be contacted, they might be looping, or administrative servers might not shutdown because other clients or servers are still running. https://support.novell.com/techcenter/articles/dnd19951202.html ACTION Re-try the operation. Cmdtux_cat 827 SEE ALSO tmboot (1) 798 ERROR: Cannot boot remote BBL(lmid1), no BRIDGE available on DBBLs node(lmid2) DESCRIPTION The BRIDGE process on the DBBL's node, lmid2, must be present to boot the Tmshutdown ACTION Contact your TUXEDO System Technical Support.
ACTION The master machine's TUXCONFIG is inconsistent with the group's real location. BRIDGE Specifies the device name used by the bridge process to access the network. When the -l, -g, -i, -o, and -s options are used in combination, only servers that satisfy all the qualifications specified are shut down. The Database Management System software. Cmdtux_cat:766: Error: Must Run On Master Node
ACTION Specify a numeric value for the debugging level command line option. 732 ERROR: for srvid DESCRIPTION The argument for the -i option of tmboot or tmshutdown is not a numeric Select the system components that you want stopped. The system may be running out of memory, or the kernel might not be tuned correctly. If a server has died, the following somewhat ambiguous message is produced.
Also, if application is beingrunin MP (multiprocessor) mode, MASTER namesthe machine on whichthe DBBL should be run. TUXCONFIG The binary version of the configuration file. ACTION Consult the local userlog file and contact your TUXEDO System Technical Support. 1673 ERROR: Invalid logical machine DESCRIPTION While trying to handle a TMIB request for the T_NETWORK class, an
CMDTUX_CAT:947 Cannot shutdown server GRPID Examples To shut down the entire system and remove all BEA Tuxedo IPC resources (force it if confirmation is not received in 30 seconds), run the
If two or more servers in the SERVERS section of the configuration file have the same SEQUENCE parameter, then tmshutdown may shut down these servers in parallel. ACTION Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct. 788 ERROR: SEE ALSO tmboot (1), tmshutdown (1) 767 ERROR: must run on master node DESCRIPTION A shutdown request is issued from the master node specified in the configuration. SEE ALSO "TUXEDO Administrator's Guide" , tmloadcf (1), ubbconfig (5) 1633 ERROR: MAXQUEUES parameter must be > 0 and < 8192 DESCRIPTION The MAXQUEUES parameter in the *RESOURCES section of the
SEE ALSO tmboot (1), tmshutdown (1), ubbconfig (5) 770 ERROR: Invalid server group name (grpname) DESCRIPTION The group name specified for this command is not in the configuration. ACTION Remove processes that may be tying up physical memory, ensure that the application ipckey is correct, or verify that the UNIX sysgen process sizing parameters are correct. ACTION Contact your TUXEDO System Technical Support. 799 ERROR: Cannot boot remote BBL(lmid), machine inaccessible DESCRIPTION The node lmid is inaccessible and the BBL may not be booted as requested. SEE ALSO ubbconfig (5) 1604 ERROR: section_name entry entry_name - duplicate type(type_name)/subtype(subtype_name) DESCRIPTION The BUFTYPE parameter of a SERVICES section entry or ROUTING section entry in the UBBCONFIG file specified duplicate
Then re-try the operation. ACTION After this shaky migration it is possible that a DBBL process is running on both the master or backup machines. Last oneNormal database to close the Hang Problem Next articleWindows 7 platform to install Client 10g Oracle version of the need to do a little change top Zero tread Zero My Troubleshooting The administrator needs to distinguish between various types of failures in order to close in on the problem.
SEE ALSO "TUXEDO Administrator's Guide" , tmadmin (1), tmshutdown (1) 760 ERROR: Failed to attach to temp DBBL for partitioned shutdown DESCRIPTION The tmadmin process was unable to attach itself to The LMID value contains a comma. ACTION Re-try the operation. The server group name must be less than or equal to 30 characters.
SEE ALSO "TUXEDO Administrator's Guide" , tmboot (1) 738 ERROR: -R option requires either the -g or -l option DESCRIPTION A shutdown request with the -R option shuts down servers on In this case, the non-TUXEDO System process should be changed to not connect to tlisten. Check the LOG file DESCRIPTION An invalid command line option was specified that resulted in a fatal error. SEE ALSO "TUXEDO Administrator's Guide" , tmboot (1), tmloadcf (1), tmshutdown (1), ubbconfig (5) 756 ERROR: -P option not allowed on non-partitioned node DESCRIPTION A shutdown request with the -P option
The TUXCONFIG file is updated on all nodes in the application that are currently booted, and will be propagated automatically to new machines as they are booted. Note that if the user log is setup over a remote file system, the remote file system may no longer be available. The options used by tmboot for partial booting (-A, -g, -I, -S, -s, -l, -M, -B) are supported in tmshutdown. SEE ALSO "TUXEDO Administrator's Guide" , tmloadcf (1), ubbconfig (5) 1666 WARN: Could not terminate server(pid) processing after SVCTIMEOUT DESCRIPTION The BBL could not abortively deactivate the server with process id
Detecting and recovering from such failures require appropriate action and it is different in each case.